Damp and mold: keeping a house dry
Mold is not really a cleaning problem; it is a water problem. Mold spores are everywhere, indoors and out, and they start to grow when they land on a wet or damp spot.[1] Keep the house dry and mold has nowhere to grow. Clean it without fixing the water, and it comes back.
Why it matters
Molds produce allergens and irritants, and in some cases potentially toxic substances.[1] Mold also damages what it grows on: drywall, wood, carpet, ceiling tiles. If anyone in the house has asthma, allergies or a weakened immune system, or feels unwell, ask a doctor about the mold rather than relying on this guide.
Step 1: find the water
Every patch of mold has a water source. The common ones:
- Leaks from pipes, roofs, windows and around tubs and showers. The leaks guide covers how to find them.
- Condensation on cold surfaces: windows, outside walls in closets, cold water pipes. Water on the inside of a windowpane is a sign of high humidity.[1]
- Humid air from showers, cooking and laundry with nowhere to go.
- Ground water in basements and crawl spaces, often from gutters and ground that sends rain toward the house.
Step 2: keep humidity down
The EPA suggests keeping indoor humidity below 60 percent, ideally between 30 and 50 percent.[1] A cheap humidity meter tells you where you are. To bring it down:
- Run the bathroom fan during showers and for a while after; use the range hood when you cook.
- Vent moisture-producing appliances such as clothes dryers to the outside where possible.[1]
- Use air conditioning or a dehumidifier in humid weather, and empty or drain the dehumidifier.
- Keep air conditioning drip pans clean and drain lines flowing.[1]
- Outside, keep gutters clear and the ground sloping away from the foundation.[1]
Step 3: dry things fast
When water gets in, speed is everything. If wet or damp materials are dried within 24 to 48 hours, in most cases mold will not grow.[1] Fans, a dehumidifier and open windows on a dry day all help.
Step 4: clean what you can, safely
The EPA's guidance is that if the moldy area is less than about 10 square feet, roughly a 3 foot by 3 foot patch, in most cases you can handle the job yourself.[1] If there has been a lot of water damage, or the mold covers more than 10 square feet, get professional help.[1] Also call a professional if the mold is in the heating or air conditioning ducts, or if the water was sewage or other contaminated water.
For a small area:
- Protect yourself. The EPA lists gloves, goggles and an N-95 respirator, and advises avoiding breathing in mold or spores.[1]
- Hard surfaces: scrub the mold off with detergent and water, then dry completely.[2]
- Soft and porous materials such as ceiling tiles and carpet may have to be thrown away if they become moldy.[2]
- Do not paint or caulk over mold. Clean it and dry the surface first.[2]
- Never mix bleach with ammonia or with cleaners that contain it: the fumes are toxic.[1]
Dead mold may still cause allergic reactions in some people, so cleaning it away matters as much as killing it.[1]
Step 5: check again
Look at the spot again a few weeks later, and after the next heavy rain. If the mold returns, the water problem is not fixed yet.
Signs to look for
- A musty smell, especially in a basement, a closet or under a sink.
- Stains or spotting on walls, ceilings and the backs of furniture against outside walls.
- Peeling paint or swollen wood near windows, tubs and showers.
- Water on the inside of windows on cold mornings.
Sources
Each source was checked on 2026-11-18. Advice changes; the agency's own page is the one to rely on.